Dirt Rider Magazine Homepage
Facebook Click here to find out more!

Dr Dirt Shimming Reassemble The Intake Cam

 
Dr Dirt Shimming Reassemble The Intake Cam
Dirt Shimming - Shim-Type Valve Adjustment
15 Upon reassembly, start with the intake cam. It will need to set into the head with the timing marks aligned. This Kawasaki has a dot at the top of each cam, and another that lines up with the machined top surface of the head. Next install the exhaust cam. Angle the gear through the chain, then roll it into place. With most engines you will have to hit the timing right, since the chain is usually too tight to jump the chain on the sprocket teeth. View Related Article
Dr Dirt Shim Type Valve Adjustment Dr Dirt Remove All Parts In The Way Of The Valve Cover Dr Dirt Shimming Use A Feeler Gauge Dr Dirt Shimming Loosen The Bolts Dr Dirt Shimming Carefully Work The Cam Caps Up Dr Dirt Shimming Metal Half Clips And The Dowels Dr Dirt Shimming Remove The Cam Chain Tensioners Center Bolt
Dr Dirt Shimming Exhaust Cam Dr Dirt Shimming Telescoping Magnet Dr Dirt Shimming Aluminum Bearing Surface Dr Dirt Shimming Wear Dr Dirt Shimming Keep Parts Organized Dr Dirt Shimming Valve Shims Are Labeled In Millimeters Dr Dirt Shimming Micrometer
Dr Dirt Shimming Install The Tappet Buckets Dr Dirt Shimming Reassemble The Intake Cam Dr Dirt Shimming Align Exhaust Cam With The Upper Surface Of The Head Dr Dirt Shimming Grease The Threads Of The Bolts Dr Dirt Shimming Torque Wrench
Get Adobe Flash player
Dirt Rider