Dirt Rider Magazine Homepage
Facebook Click here to find out more!

Dr Dirt Shimming Install The Tappet Buckets

 
Dr Dirt Shimming Install The Tappet Buckets
Dirt Shimming - Shim-Type Valve Adjustment
14 When you have your shims selected and installed, make sure the cam bearings are surgically clean and lubed with fresh motor oil or light assembly lube. Install the used tappet buckets in the holes they came from or install new ones. It is a good idea to use a little assembly lube on the cam lobes. View Related Article
Dr Dirt Shim Type Valve Adjustment Dr Dirt Remove All Parts In The Way Of The Valve Cover Dr Dirt Shimming Use A Feeler Gauge Dr Dirt Shimming Loosen The Bolts Dr Dirt Shimming Carefully Work The Cam Caps Up Dr Dirt Shimming Metal Half Clips And The Dowels Dr Dirt Shimming Remove The Cam Chain Tensioners Center Bolt
Dr Dirt Shimming Exhaust Cam Dr Dirt Shimming Telescoping Magnet Dr Dirt Shimming Aluminum Bearing Surface Dr Dirt Shimming Wear Dr Dirt Shimming Keep Parts Organized Dr Dirt Shimming Valve Shims Are Labeled In Millimeters Dr Dirt Shimming Micrometer
Dr Dirt Shimming Install The Tappet Buckets Dr Dirt Shimming Reassemble The Intake Cam Dr Dirt Shimming Align Exhaust Cam With The Upper Surface Of The Head Dr Dirt Shimming Grease The Threads Of The Bolts Dr Dirt Shimming Torque Wrench
Get Adobe Flash player
Dirt Rider