Dirt Rider Magazine Homepage

Dr Dirt Shimming Remove The Cam Chain Tensioners Center Bolt

 
Dr Dirt Shimming Remove The Cam Chain Tensioners Center Bolt
Dirt Shimming - Shim-Type Valve Adjustment
06 Before the cams can be removed to get at the tappets and shims, the tension must be taken off the cam chain. Remove the cam-chain tensioner's center bolt to relieve the spring pressure; to get the maximum slack, remove the tensioner casting as well. View Related Article
Dr Dirt Shim Type Valve Adjustment Dr Dirt Remove All Parts In The Way Of The Valve Cover Dr Dirt Shimming Use A Feeler Gauge Dr Dirt Shimming Loosen The Bolts Dr Dirt Shimming Carefully Work The Cam Caps Up Dr Dirt Shimming Metal Half Clips And The Dowels Dr Dirt Shimming Remove The Cam Chain Tensioners Center Bolt
Dr Dirt Shimming Exhaust Cam Dr Dirt Shimming Telescoping Magnet Dr Dirt Shimming Aluminum Bearing Surface Dr Dirt Shimming Wear Dr Dirt Shimming Keep Parts Organized Dr Dirt Shimming Valve Shims Are Labeled In Millimeters Dr Dirt Shimming Micrometer
Dr Dirt Shimming Install The Tappet Buckets Dr Dirt Shimming Reassemble The Intake Cam Dr Dirt Shimming Align Exhaust Cam With The Upper Surface Of The Head Dr Dirt Shimming Grease The Threads Of The Bolts Dr Dirt Shimming Torque Wrench
Ford Ranger Research
Ford Ranger When purchasing a new car it is important to be prepared and know all the information in order to make a good decision. Research the Ford Ranger and find reviews and information on fuel economy, features, options, specs, reviews and more. Fuel efficiency is important and the 2010 Ranger with a 17.0 gallon main unleaded fuel tank 14.2 capacity gets 24 mpg, and it has a comparable warranty. The Nissan Titan and the Jeep Wrangler are other vehicles that might interest you.
Get Adobe Flash player