Dirt Rider Magazine Homepage
Facebook Click here to find out more!

Dr Dirt Remove All Parts In The Way Of The Valve Cover

 
Dr Dirt Remove All Parts In The Way Of The Valve Cover
Dirt Shimming - Shim-Type Valve Adjustment
01 Remove all the parts in the way of the valve cover: seat, tank, shrouds and, on some models, the radiators. Undo the bolts and pop off the valve cover taking care not to damage the rubber gasket. Unscrew the timing plugs in the ignition cover, and use a T-handle or socket to rotate the crankshaft until the marks for Top Dead Center (TDC) are lined up. View Related Article
Dr Dirt Shim Type Valve Adjustment Dr Dirt Remove All Parts In The Way Of The Valve Cover Dr Dirt Shimming Use A Feeler Gauge Dr Dirt Shimming Loosen The Bolts Dr Dirt Shimming Carefully Work The Cam Caps Up Dr Dirt Shimming Metal Half Clips And The Dowels Dr Dirt Shimming Remove The Cam Chain Tensioners Center Bolt
Dr Dirt Shimming Exhaust Cam Dr Dirt Shimming Telescoping Magnet Dr Dirt Shimming Aluminum Bearing Surface Dr Dirt Shimming Wear Dr Dirt Shimming Keep Parts Organized Dr Dirt Shimming Valve Shims Are Labeled In Millimeters Dr Dirt Shimming Micrometer
Dr Dirt Shimming Install The Tappet Buckets Dr Dirt Shimming Reassemble The Intake Cam Dr Dirt Shimming Align Exhaust Cam With The Upper Surface Of The Head Dr Dirt Shimming Grease The Threads Of The Bolts Dr Dirt Shimming Torque Wrench
Get Adobe Flash player
Dirt Rider